WATER REDUCER POWDER
Sodium Naphthalene Sulfonate Formaldehyde is made of naphthalene, sulfuric acid, formaldehyde and liquid alkali. After sulfonation, hydrolyzation, condensation, neutralization reactions, finally dry to a powder. Sodium Naphthalene Sulfonate Formaldehyde can be used in a variety of applications as a high efficient superplasticizer, which is widely applied in the cement, construction and gypsum industries. Visight provides Sodium Naphthalene Sulfonate Formaldehyde with excellent water-reducing and dispersing properties. It can markedly reduce the amount of water and significantly increase the strength of cement, concrete and gypsum at various ages. Not only save cement, improve concrete workability, but also speed the construction progress up.
❐ TYPICAL PROPERTIES
|APPEARANCE||Yellow brown powder|
|CHEMICAL FORMULA||2(C10H6SO3Na)●(n-1) CH2●(n-2) (C10H5SO3Na)|
|WATER REDUCING RATE(%)||18~28%||17~25%||16~22%|
|NET STARCH FLUIDITY(mm)||≥250mm||≥240mm||≥230mm|
|SURFACE TENSION(N/m)||(70±1) x 10 -3 N/m|
● High water-reducing rate.
● Low sodium sulfonate content.
● High applicability.
● Appropriated setting time.
● Safety and easy to use.
❐ PACKING & STORAGE
Packing: 25KGS plastic bag or in jumbo bag
Store in a dry, clean and ventilated warehouse, avoid contact with rain and moisture. The shelf life, when the container is stored unopened and under proper conditions, is expected to be a minimum of 12 months.
● Gypsum Board
● Waterproof Concrete
● Plaster Block
● Precast Concrete
● Fluid Concrete
● High Strength Concrete
● Curing Concrete
● Concrete Blocks
SODIUM NAPHTHALENE SULFONATE FORMALDEHYDE
File Size: 692 KB