Some customers told us that their blades were not applied as it was expected, kindly advise to check the dryer running speed, the moisture will cause the blade to bad cutting performance. Make sure the board is fully dried. Here is the example, let's set the gypsum board length of the production line is [...]
China Manufacturing Raw Materials Purchase Price Index is at a current level of 67.10, up from 53.80 one year ago. This is a change of 24.72% from one year ago. In 2020, worldwide demand for oil fell rapidly as governments closed businesses and restricted travel due to the COVID-19 pandemic. The average [...]
We are sharing you some information about gypsum edge tape, which can seal two boards together only with water, no pollution. The popular edge tape most of gypsum board factories applied, specification as below: 1. Width: 50mm 2. Length per roll: 1000m 3. Paper: 68GSM/sqm 4. Glue: 20GSM (123microns) 5. Flexo printing 6. Glue: [...]
The main component of the naphthalene basis superplasticizer is the sodium salt of naphthalene sulfonic acid formaldehyde condensate, which is widely applied in concrete and cement. The characteristics of sodium naphthalene sulfonate are high water reduction rate, a low impact on the concrete setting time and low air-entraining properties. Because of these [...]
1. The Function of Gypsum Board Adhesive The production and molding of the gypsum board is the bonding of gypsum board surface paper and gypsum slurry. The surface paper must be firmly bonded to the gypsum board core, so that the gypsum board has a specific strength. The effect and performance of the adhesive [...]
The technical parameters of gypsum board are calculated based on the length of 3000mm, the width of 1200mm, and the thickness of 9.5mm.
What is VISIGHT mission? At VISIGHT, our approach to safety and quality chemicals and materials to is be your most reliable and resourceful partner. We pride ourselves on being an Outstanding Materials Supplier. What kind of customers is VISIGHT focusing on? VISIGHT offers a [...]